It is installed under the last screen or mounted externally. And a suction hose is connected to vacuum unit. The compressed air from air compressor or the rig air supply is required to create suction on the last screen surface, pulling additional fluid off the cuttings. It can reduce the liquid on the cuttings by 30%-50%.
Widely application for OBM, SBM, and WBM.
Both onshore and offshore application to reduce waste and recovery fluids.
To replace High G drying shale shaker without any extra consumption of shaker screens.
Less foot print and easy installation without welding.
Reduce waste by 30% to 50%.
Finer shaker screen can be used to improve the solids control efficiency.
Less cost for driling cuttings transportation.
No electric power required, suitable for work in hazardous area.
The suction and discharge time is adjustable according to different driling conditions.
| Model | BZVP-40 | BZVP-20 |
| Max Capacity | 40m³/h | 20m³/h |
| Inlet/Outlet Size | 4" | 3" |
| Vacuum Degree | 0.085MPa/0.87kgf/cm² | |
| Max Suction Distance | 50m | |
| Max Discharge Distance | 1000m | 500m |
| Max Solids Content | 100% | |
| Max Solids Size | 75mm | 50mm |
| Pressure Request | 0.55MPa-0.78MPa (5.6-8.0kgf/cm²) | 0.55MPa-0.69MPa (5.6-7.0kgf/cm²) |
| Air Demand | 17m³/min | 7.9m³/min |
| L*W*H | 1578 x 1440 x 2030mm | 1200 x 800 x 1470mm |
| Weight | 1200kg | 480kg |
Email: benny@bzsolidscontrol.com
Call Us: 0316-5166559
Address: Xiangfeng Street, Train Station Road, Sanhe, Hebei, China 
English
